Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028
www.shorestation.com
0004160
Page
17
of
25
Rev
B
10/7/2010
Assemble the short braces by putting the bushing into the cap and then insert the cap into the end of
the tube so the bushing aligns with the hole in the tube. Repeat this process on the other end and on
the other brace tubes.
With the braces assembled,
place a washer on a 3/8 X 1 3/4
hex bolt and insert in the hole in
the brace tube thru the bushing
out the other side and thread
into the insert nut on the winch
post this will determine the
location for the remaining short
braces. Swing the brace tube
over and place a washer on a
3/8 X 3 3/4 hex bolt and insert
into the hole in the brace tube
thru the bushing and thru the
hole in the lower frame closest to
the post, secure with a flange
lock nut. Repeat this process on
the other short braces.
66095 - BUSHING - DOCK STAIRS SIDEFRAME
70529 - BRACE TUBE SHORT SS1564
0110059 - HH 3/8-16 X 3 3/4 CS GR5
0140047 - HH 3/8-16 X 1 3/4 CS GR5
1340095 - WASHER USS FLAT 3/8
1440101 - HEX LOCKNUT FLANGE 3/8-16 W/T
3510214 - HAND RAIL END CAP