background image

HOT TUB CARE AND MAINTENANCE 

Draining Your Hot Tub

 

Under normal usage, you should change the water in your hot tub every 3-4 months. 

To drain hot tubs equipped with the Quick Drain System, first turn off electrical power 

to your hot tub.  Unscrew the round cap in the center of the quick drain and attach a 

garden hose.  Turn the outer ring (or valve) 1/2 turn counterclockwise and pull it to-

ward you to open it.   To close, push it in and turn it clockwise 1/2 turn.   

The remaining water in the hot tub can be scooped or sponged out and you are now 

ready to clean the ABS plastic surface.  Note:  It is recommended that you not drain 

water onto grass or vegetation since chemicals in the hot tub water may damage 

them. 

 

Cleaning The Hot Tub Surface 

Your Shoreline Leisure Products™ hot tub is manufactured with a premium grade weatherable ABS.   The quality finish 

is durable and easy to clean and maintain.  When the hot tub is empty, you can clean the surface by using a mild, non-

abrasive liquid detergent, or specially formulated hot tub cleaner.   Thoroughly remove all residue from the cleaning 

agent prior to refilling the hot tub.  Do not use an abrasive brush or cleaning agent, as it will scratch the ABS finish.  If 

you have stubborn dirt or scum marks at the water line, use a hot tub cleaner and a scrub pad designed for use on plas-

tic surfaces, which are available at your local hot tub dealership.   

 

Power Boost and Micro Jets 

The interchangeable Power Boost and Micro Jet inserts should be removed from time to time to clean off any accumu-

lated hair, dirt deposits, etc.  This will insure proper operation of the water flow control feature. 

 

Thermal Hot Tub Cover 

It is important that you properly care for your hot tub cover.  Do not sit or stand on the 

cover, as it will break.  Do not let snow build up on your cover.  Locking tie-down 

straps are included with your cover and should be used to prevent access to the hot 

tub by children.  They will also help to prevent the wind from lifting the cover off your 

hot tub.  If your hot tub is located outdoors, it is important that the cover be installed on 

the hot tub even if the tub has been drained.  This will protect the hot tub shell from the 

intense heat of the sun.  Periodically clean your cover as described in the maintenance 

and cleaning instructions provided with the cover.  When handling your cover, take care not to drag it over rough sur-

faces that will scuff or tear the fabric.  Always lift by the handles or use the cover lift device which is available from your 

Shoreline Leisure Products™ dealer. 

 

Hot Tub Exterior Care 

The hot tub exterior is made of a specially formulated polyethylene plastic.  It is very resistant to scratching and denting 

and can be cleaned with a mild detergent or vinyl siding cleaner. 

Summary of Contents for Hot Tub

















Reviews: