{13}
Shor-Line | 800.444.1579 |
www.shor-line.com
;
Section 5: Stainless Steel Care & Cleaning
{Quality & Life of Your Product}
IMPORTANT: Routine maintenance will ensure quality and life of your long-term investment and protect animals from
transmittable disease and infection
IMPORTANT: To safeguard your investment and rights to the Shor-Line's Warranty, it is important that you know
factors that degrade stainless steel. Corrosion, pitting, and discoloration can occur if:
• Bleach, deodorizing agents, disinfectants, and sanitizers (chlorides, bromides, iodides and thiocyanates) stand
wet on your product for a prolonged period (over two minutes).
• Bleach, deodorizing agents, disinfectants, and sanitizers are used frequently without being neutralized with clean
water after each application.
• Acidic urine is not removed rapidly and surfaces are not washed thoroughly.
• Animal hair, holding urine and fluids, is allowed to collect around legs, hinges, casters, and welded wire
intersections.
• Solutions like liquid bleach and antibacterials are allowed to evaporate and dry on surfaces.
• Particles from steel wool, metal fiber brushes, or metal scrapers (which are never recommended for cleaning
stainless) get embedded in your product’s surface, rust, and give the false impression that the stainless steel is
defective.
• Your water source (local or well) is heavy in iron content and water is allowed to dry on your product.
• High levels of pollution (automotive exhaust, aggressive gases, soot, iron oxides, chemicals, etc.) or chloride (from
sea or de-icing salts) exist in the environment and frequent, thorough cleaning (manual or rain-washing) does not
occur.
{Care & Cleaning Best Practices}
IMPORTANT: You play an essential role in safeguarding your investment and rights to Shor-Line’s Warranty. We
strongly recommend:
• Daily or weekly cleaning of stainless steel to prolong its longevity and value and to help you maintain its finish.
• Using the mildest cleaning procedure that will do the job effectively.
- Ordinary waste deposits and fluids can usually be removed with soap and water. Rinse thoroughly with clear
water and dry completely with a soft cloth to discourage water spotting.
- Minor scale build up and some hard water spotting can be removed by washing with vinegar followed by a
clearwater rinse and thorough drying.
- If rubbing, brushing, or scraping is required, use only stainless steel wool, brushes with plastic, nylon or
stainless steel fibers, and scrubbers made of plastic or nylon. Ordinary steel wool or steel brushes should
never be used.
- Stubborn deposits or tightly adhering debris may require a commercial cleaning product. Scouring powders
will scratch stainless and should not be used. Always review label statements on cleaning products regarding
use on metals.
- Cleaning is not completed until fresh water has been used to thoroughly rinse all residue of salt, bleach,
deodorizing agents, disinfectants, and sanitizers.
• Rubbing, drying, and polishing should always be in the direction of the product’s grain so scratches will blend into
the surface. Efforts opposite the grain may produce a scratched surface appearance.
• Rubbing a soft cloth moistened with olive oil, undiluted white or cider vinegar, or club soda may brighten stainless
steel and help remove surface streaks and heat stains.
• Never use paint, lacquer, or varnish as a substitute or shortcut for properly caring and cleaning stainless steel.
• Never intentionally stamp or etch stainless surfaces.
