{11}
Shor-Line | 800.444.1579 |
www.shor-line.com
;
{Adjustment Instructions}
The following steps should be taken to adjust the level of the table.
TOOLS REQUIRED:
9
/
16
" Wrench
3
/
16
" Allen Wrench
Step 1
Using a
9
/
16
"
Wrench, loosen the
jam nut. See Fig. 3A.
Step 2
Put a level on the surface of the table,
ensuring that it is perpendicular to
the wall.
Step 3
Using a 3/16" Allen Wrench, turn
the set screw until the level bubble
is centered. Turning clockwise
will raise the end of the table and
counterclockwise will lower the end
of the table.
Step 4
While holding the set screw in place
with the allen wrench, tighten the jam
nut with the
9
/
16
"
Wrench.
Fig. 3A
