SHOR-LINE 908.0000.01 Assembly Manual Download Page 6

Page: 6 / 20

Shor-Line.com

SAFETY

Safety Decal Locations

Kat Klowder Safety Decal Locations

LOCATE ON BACK

Kat Klowder

Mobile Cat Play Area

Set-up · Collapse · Stow Instructions

Guide Supplement PN: 006.9080.00

511 Osage

Kansas City

Kansas 66105

(800)444-1579

(913)281-1500

Shor-Line.com

Shor-Line’s Kat Klowder

The Kat Klowder is a self-contained mobile cat adoption and play area. The Kat Klowder can be used as a mobile

display for cat adoptions, disaster response holding space and as a cat play area.
The Kat Klowder utilizes; PVC lower panels, either clear acrylic or PVC coated wire mesh upper panels, PVC coated wire mesh top panels and PVC (opaque)

back panels combined with lightweight framing providing a manageable display unit that can be easily erected and moved safely with two people. Once the

unit is removed from the shipping materials, follow the procedures below.

READ ALL WARNINGS AND PROCEDURES COMPLETELY BEFORE USING THE PRODUCT, AND THOROUGHLY UNDERSTAND AND

FOLLOW ALL SAFETY INSTRUCTIONS.

Ensure the Kat Klowder is level during assembly and when stowed to prevent possible tipping which, if not avoided, could result in

SERIOUS INJURY or DEATH.

This product is intended to be used for animals only. Do not use for anything other than the intended purpose.

Keep hands clear of possible pinch areas when assembling parts which, if not avoided, could result in MINOR to MODERATE INJURY.

Do NOT attempt to set-up, collapse or move the Kat Klowder with one person. Tipping, causing personal injury and/or damage to the

unit could occur.

Set-up Procedures

The following procedures require two people to safely set-up the Kat Klowder. Both sides of the unit must unfold simultaneously. The front casters should be

engaged (touching the floor) and the back casters should be disengaged (raised above floor) for these procedures. Use the foot operated pedal to raise and

lower the casters as needed.

SteP 1:

Retaining pin - Slide the pin out and rotate out of the pin receiver. Repeat this step for both

the right and left sides.

SteP 2:

Unfold the Panels - Simultaneously (both sides) lift the top panel up to clear the panels

while pulling out the front panel. Careful to raise the top panel high enough to clear the

front and side panels until they are fully extended. Hand placement is important while

unfolding the wall panels.

Right hand side:

Right hand on top panel handle, left hand on wall panel handle.

(Left hand side shown)

Left hand side:

Left hand on top panel handle, right hand on wall panel handle.

(Left hand side shown)

SteP 3:

Side Panel Pins - Align the pin of the top panel with the side panel track. Repeat this step

for both the right and left sides.

SteP 4:

Top Panel Latch - Unlatch the top panel by rotating the latch lever clear of the screw head.

Repeat this step for both the right and left sides.

SteP 5:

Flip the top panel over to meet the front panel top rail.

SteP 6:

Front Panel Pin - Align the top panel pin (centered on door) with front panel top track. Pull

the front panel outward to help align the center pin with track.

SteP 7:

Casters - Once the Kat Klowder is in the correct location and is clear of people and

obstructions, safely lower the casters.

Collapse Procedures

The following procedures require two people to safely collapse (fold) the Kat Klowder. Both sides of the unit must be folded simultaneously. Do not attempt to

collapse the Kat Klowder while the space is occupied, clear the Kat Klowder of all animals and debris. Fold (up) all perch shelves in their full upright position.

The front casters should be engaged (touching the floor) and the back casters should be disengaged

(raised above floor) for these procedures. Use the foot operated pedal to raise and lower the casters

as needed.

SteP 8:

Flip the top panel over onto the other half of the top panel, secure by using the latch on

both ends.

SteP 9:

Simultaneously (both sides) lift the top panel up to clear the panels while pushing in

slightly the side panels at the middle seam to clear the top panel pin.

SteP 10:

Raise the top panel high enough to clear the front and side panels until they are fully

collapsed while sliding the front panel towards the back panel. Hand placement is

important while folding the wall panels.

Right hand side:

Left hand on top panel handle, right hand on wall panel handle. (Left hand side shown)

Left hand side:

Right hand on top panel handle, left hand on wall panel handle. (Left hand side shown)

NOte:

Apply inward pressure to the side panels to encourage simultaneous folding of the side panels.

SteP 11:

Rotate and slide the retaining pin into the pin receiver and lower the front casters. Repeat

for both the right and left sides.

SteP 12:

Slowly lower the top panel down-over the front panel.

Product Care Recommendations

Avoid ammonia-based cleaners that are typically used on glass windows. These chemical cleaners can damage acrylic surfaces, leaving them looking cloudy

and dull. Do NOT use any commercial window cleaning sprays unless they are non-abrasive and specifically recommended for acrylic. Always use soft, clean

microfiber cloth for cleaning and blot drying acrylic surfaces. Mild soap and water mixture (3 drops/gal of water) is recommended for cleaning acrylic surfaces.

Blot dry all surfaces to help deter water spots.

APRIL 2019

(Panel styles and finishes may vary)

Shelf Operation

During movement and storage, the Perch Shelves should be in the stowed position, upright. The Shelves

pivot on their wall brackets. Rotate the shelf upward for the stowed position.

SteP 8

SteP 10

SteP 9

SteP 1

SteP 2

SteP 3