~6~
Please use your Powerchair often and let it expand your horizons. The more
mobility your Powerchair brings, the happier you will be! But, with all things,
observing a few rules will ensure safe maneuvering. So please…
(1)
Do not
drive the Powerchair without reading this instruction manual.
(2)
Do not
use the joystick in an erratic manner when going up or down an incline.
(3)
Do not
carry passengers or exceed the maximum user weight (Table 2).
(4)
Do not
turn off the joystick controller by switching the On / Off Button
when moving at speed. This will bring the electromagnetic brakes on
i m m e d ia te l y a n d co u l d ca u se d a m a ge t o t h e jo ys t i c k c o n t ro l l e r.
(5)
Do not
drive over uneven or soft terrain.
(6)
Do not
mount or dismount the Powerchair unless the electromagnetic
brakes are engaged and the joystick controller is off.
(7)
Do not
attempt to drive over curbs greater than 20mm in height. Doing so could
cause your Powerchair to turn over, causing personal injury or damage to the
Electric Wheelchair. For curbs less than 20mm, always approach them at a low
speed
(8)
Do not
operate the Powerchair if the unit is in freewheel mode.
(9)
Do not
use on the road, except when crossing between sidewalks.
(10)
Do not
sit on the Powerchair when in a vehicle, but transfer to a vehicle seat.
(11)
Do not
exceed any grade over 6 degrees (10%).
(12)
Always
stop fully before changing forward or reverse direction.
(13)
Always
engage a slow speed when going down gradients (move the joystick
slowly towards center position to reduce the speed).
(14)
Always
approach and climb over curbs at slow speed.
(15)
Always
use the safety belt.
(16)
Always
keep feet on the footrest while driving.
(17)
Always
make sure the batteries are fully charged before setting out on a journey.
(18)
Always
make sure the Allen bolt, hex screws and nuts of the seat adaptor and seat
post are securely tightened before driving the Powerchair.
(19)
Always
charge the Powerchair in a well ventilated area.
(20) Whenever a center bolt of the wheel assembly has been loosened, please
replace with a specified new bolt from authorized providers and secure with a
torque of 240
±
5 kg-cm together with Loc-tite 271 adhesive (or equivalent).
SAFETY INSTRUCTIONS
Summary of Contents for UL8-W12 COMO
Page 24: ...24...