Shoprider 888WNLL, User Manual

Page: 8 / 20

Joystick Arm Control (VSI Controller)
Battery Gauge (1)
This is a 10-segment display, which indicates
if the VSI is switc hed on and gives the state
of charge of the battery. Also, any faults in
your power chair’s elec trical system are also
indicated by this display. Refer to page 15 for
details.
Maximum Speed Indicator (2)
This is a 5-segment di splay, which indicates
the speed setting selected. 1 bar indicates
the slowest setting and 5 bars the fastest.
On/Off Button (3)
This button turns your joystick contro ller (VSI) on and off. Do not use this
button to stop the power chair, except in an emergency.
Horn Button (4)
This button operates your powerchair’s horn.
This should only be used to
warn others of your presence and not as a rebuke of any form.
Speed Decrease Button (5)
This button decreases your maximum speed.
Speed Increase Button (6)
This button increases your maximum speed.
Joystick (7)
This controls the speed and direction of your powerchair. Push the joystick in
the direction you want to go. The furt her you push it, the faster the speed will
be. Releasing the joysti ck will automatically engage the brakes and bring the
powerchair to a controlled stop.
‘Sleep’ Mode
If the joystick is left on and the powerchair is not used for 10 minutes, it will go
into ‘sleep’ mode, which is indicated by a slow flashing of the battery leds.
Simply turn the power off and on to resume operation.
VSI
Joystick
7