2D_Shop camera . English manual
5
Orientation
The 3 leds must be inside the shop, in order to have a simple default software installation
Inside
Figure 5 : orientation of the camera
Electrical
On the back of the camera are two connectors :
RJ45 connector : it is a POE link, the network cable carries the power and the Ethernet data.
Green pulse connector : useful when the camera is for infra red beam replacement.
POE Ethernet connection
This camera uses passive POE (power over Ethernet) connector.
The cable carries 0 Volt on pins 7,8, and +48 Volts on pins 4,5
Connecting the camera to an active POE switch will not work.
A POE power supply is provided with the camera :
Figure 6 : POE adapter
Data in goes to the IT switch
Data and power out connect to the camera
In case of multiple cameras, a poe switch is desirable.
It must be the
passive type
with power on 4,5 and 7,8 .
