2D_Shop camera . English manual
12
Type
Most of the time the type of counting will be entrance to the shop. It can be set as corridor as well,
especially if heatmap is used only.
½ division
I
n some cases, quite rare, accuracy will be improved if both channels are used as entrances
added and the total divided by two.
The window shows the number of counts per 15 minuts agregation time. It cannot be changed.
The last two channels are kept for software compatibility with data logger CBOX used with infra red
beams.
At the bottom, arrows show recorded data into device memory for approximately one month.
In some cases a paste and copy can be usefull.
Data delivery
Figure 15 Data delivery
Data can be delivered to some FTP or HTTP server.
Many instances can be installed by the “ADD” button for example to send to local PC and some server.
Most common is the FTP protocol, which needs opening port 21 on the route. It will be described in the
software section.
Delivery schedule
From once a minut to once a day. In case of a multiple store server be
carefull not to overload the link and the data base service.
IP address of the server
It can be on the local server as seen on the figure, 192.168.1.37 or on a
distant server like frequence.shopline.fr
Login
Name of the FTP account
Password
Name of the password for this account
Directory
A directory is created automatically on the server account directory.
The settings which are indicated in the figure will be convenient when configuring a server on a local PC
in a shop.
Testing
Will ensure that everything is fine and that the file will be safely written on
the server
