6
To make assembly even easier-we’ve
manufactured our own ShopBot-cut joinery for
V-slot extrusion. They will be referred to by the
letter of the alphabet that they most closely
resemble.
L
(005983)
x24
X
(005987)
x1
T
(005986)
x10
I
(005988)
x1
7
Callouts go here
Callouts go here
You’ll just need to drop the joint into place on
the extrusion and tighten the bolt-heads to lock
the structure in place.
Lock!
Twist!
8
Most of the joints have protruding “stops” to
ensure accurate positioning during assembly.
Just slide the extrusion in until it contacts the
corner stop and hold firm while you tighten the
bolts.
9
Every connection will be made with at least two
screws. To ensure a tight fit, always tighten the
screw furthest from the corner first, this will pull
the extrusion into the corner. Once the outer
screws are tightened, the extrusion will be fixed
in place and the inner screws can be tightened.
