Desktop Quick Start Guide • October 6, 2017
© Copyright 2017 ShopBot Tools, Inc.
page 27
Click “OK” to continue to the FULL interface.
When the command console pops up, notice the
“EASY” button that can be used to switch back to
ShopBotEASY when necessary.
Surfacing the Deck
The basic deck is made out of MDF. It
makes a good sacrificial deck, but the
thickness can vary due to the manufacture of the material and changes in humidity. For most cutting
this doesn’t matter, but for critical depth cutting/pocket cutting or v-carving, the MDF should be sur-
faced first. Use the “Table Surfacer” routine under “Tools” in the FULL ShopBot control. It can also be
accessed by typing “TU”.
