-32-
Model W1878 (For Machines Mfd. Since 4/21)
O
PE
R
ATIO
NS
Figure.34.
Switch disabled by padlock.
Disabling.Switch
The switch can be disabled by removing the key, as
shown below. Disabling the switch in this manner can
prevent unauthorized operation of the machine, which
is important if it is not kept inside an access-restricted
building or in a location where children may be present.
IMPORTANT:
Disabling the switch only restricts its
function. It is not a substitute for disconnecting machine
from power when adjusting or servicing.
Children or untrained people can be killed or
seriously injured by this machine. This risk increases
with unsupervised operation. To help prevent
unsupervised operation, disable and lock the switch
before leaving machine unattended! Place key in a
well-hidden or secure location.
Setting.Upper.Blade.
Guide.Height
When cutting, the blade guides must always be positioned
so they just clear (no more than
1
⁄
4
") the workpiece. The
guide post, shown in
Figure.35
, allows the upper blade
guide assembly to be quickly adjusted for height.
To.adjust.height.of.upper.blade.guides,.do.these.steps:
1.
DISCONNECT MACHINE FROM POWER!
2.
Loosen guide post lock knob.
3...
Using guide post control knob, adjust height of the
guide post so that blade guide assembly just clears
(no more than
1
⁄
4
") workpiece.
4.
Re-tighten lock knob to secure setting.
Figure.35.
Guide post, lock, and control
knobs.
Guide Post
Control
Knob
Guide Post
Lock Knob
Guide
Post
Summary of Contents for W1878
Page 60: ......
