The. indexable. inserts. are. very. sharp.
and.can.easily.cut.your.hands..ALWAYS.
use.caution.when.handling.these.parts.
to.reduce.risk.of.personal.injury.
Straightedge
Outfeed Table
Infeed Table
Figure.31.
Infeed and outfeed table height
set evenly.
Black Lines Represent
Straightedge Positions
from Overhead View
Figure.32.
Straightedge positions for
checking infeed/outfeed table parallelism.
-34-
Model W1876 (For Machines Mfd. Since 7/20)
SE
RV
IC
E
Checking.Infeed.Table
1.
Follow all steps for checking outfeed table
parallelism to first make sure that outfeed table is
parallel with cutterhead.
2.
Insert included Torx driver into cutterhead rotation
guide and rotate cutterhead so inserts will not
interfere, then place straightedge on infeed and
outfeed tables and adjust infeed table even with
outfeed table, as shown in
Figure.31
.
Note:
Infeed table depth-of-cut scale should be set
at "0".
3.
Place straightedge in the positions shown in
Figure.
32
. In each position, straightedge should sit flat
against both outfeed table and infeed table.
— If straightedge sits flat against both infeed and
outfeed tables in all positions, then tables are
parallel. Install cutterhead guard and fence.
— If straightedge
does not
sit flat against both infeed
and outfeed tables in any of the positions, then
perform
Adjusting.Table.Parallelism
on
Page.35
.
Summary of Contents for W1876
Page 52: ......
