Shop fox W1851, Owner'S Manual

Page: 96 / 100

-94-
Model W1851 (For Machines Mfd. Since 10/17)
PA
RT
S
Safety.labels.warn.about.machine.hazards.and.how.to.prevent.serious.personal.injury..The.owner.
of.this.machine.MUST.maintain.the.original.location.and.readability.of.all.labels.on.this.machine..
If.any.label.is.removed.or.becomes.unreadable,.REPLACE.that.label.before.allowing.machine.to.
be.operated.again..Contact.us.at.
(
360
)
.734-3482.or.www.woodstockint.com.to.order.new.labels..
Labels.&.Cosmetics
REF PART # DESCRIPTION REF PART # DESCRIPTION
701 X1851701 MACHINE ID LABEL 708 X1851708 BLADE GUARD LABEL
702 X1851702 READ MANUAL LABEL 709 X1851709 HANDWHEELS NOTICE LABEL
703 X1851703 TABLE SAW WARNING LABEL 710 X1851710 TOUCH-UP PAINT, SHOP FOX WHITE
704 X1851704 RIVING KNIFE CAUTION LABEL 711 X1851711 EYE/LUNG HAZARD LABEL
705 X1851705 DISCONNECT POWER LABEL 712 X1851712 SHOP FOX NAMEPLATE D3377
706 X1851706 ELECTRICITY LABEL 713 X1851713 MODEL NUMBER LABEL
707 X1851707 DON'T OPEN DOOR WARNING LABEL
Mfd. for Woodstock in China
Specifications WARNING!
Motor: 2 HP, 115V/230V, 60 Hz, Single-Phase
Pre-Wired: 230V
Full-Load Current Rating: 16A at 115V, 8A at 230V
Blade Size: 10" x 5/8" Arbor
Required Blade Kerf Thickness: 0.102"–0.126"
Arbor Speed: 3850 RPM
Max. Rip Capacity: 31-1/2"
Max. Depth of Cut @ 90˚: 3-1/8"
Max. Depth of Cut @ 45˚: 2-3/16"
Max. Dado Width: 13/16"
Weight: 396 lbs.
Date
S/N
MODEL W1851
2 HP 10" HYBRID TABLE SAW w/EXTENSION TABLE
12. Make sure blade is stopped before adjusting the height or tilt.
13. Do not perform any operation freehand.
14. Never use fence and miter gauge at the same time.
15. Ensure machine is stable and fence is parallel with blade.
16. Disconnect power before changing blades or servicing saw.
17. Plan cuts so that workpieces always remain supported.
18. Non-through cuts (i.e. dadoes, rabbets, moulding cuts) and
resawing cuts present specific dangers; refer to the manual.
19. Do not wear loose clothing, gloves, jewelry, or other items that
can get entangled. Tie back long hair and roll up sleeves.
20. Do not expose to rain or operate in a wet environment.
21. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
To reduce risk of serious injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Never touch moving blade, and keep hands out of cutting path.
3. Always wear approved eye protection and respirator.
4. Only plug power cord into a grounded outlet.
5. Always use blade guard/spreader for all through cuts; and use
riving knife for all non-through cuts. If a certain cut cannot be
made with either device, some other safeguard MUST be used.
6. Only use blades meeting size/speed requirements for this saw.
7. Ensure spreader/riving knife and fence are properly adjusted.
8. Never reach behind or over blade while it is moving.
9. Use a push stick when required and whenever possible,
especially with small/narrow workpieces and non-through cuts.
10. Know what causes “kickback” and how to prevent it.
11. Never remove jammed/cutoff workpiece when blade is moving!
COLOR CODES
Use D3377
(5
1
⁄
8
" X 11
1
⁄
8
")
Rotating blade adjustment handwheels into
stopping positions with excessive force could
result in a loss of blade parallelism with miter
slot, impaired stop-collar accuracy, and
damage to internal components. This type of
damage is not covered by warranty!
The Model W1851
spreader/riving knife is
0.1" thick. Follow these
requirements to ensure the
spreader/riving knife works
safely:
BLADE REQUIREMENTS
Standard Blades
• Diameter: 10"
• Max. Body Thickness: 0.094"
• Min. Kerf Thickness: 0.102"
• Must be aligned with
spreader or riving knife.
Dado Blades
• Dado blades under 10"
diameter not compatible
with riving knife.
• Max Width: 13/16"
WARNING!
EYE/EAR/LUNG
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when
using this machine.
READ and UNDERSTAND
MANUAL to avoid serious
injury! If a manual is not
available, DO NOT use
machine! Instead, go to
www.woodstockint.com
or call (360) 734-3482.
WARNING!
Removing blade
guard increases
risk of injury—it
MUST be installed
when possible. If blade guard is
removed for a
special cut, some
other safeguard
MUST be used.
AMPUTATION
HAZARD!
Always keep
fingers and
hands away from
moving blade.
Disconnect power
before changing
blades or blade
guard and riving
knife.
WARNING
ACCIDENTAL INJURY
HAZARD!
Disconnect power
supply before
adjustments, setup
or maintenance!
INJURY HAZARD!
Do not open door
while machine is
connected to power
or blade is in motion.
W1851
***
701
702
703
704
705
706
707
708
709
710
711
712
713