-24-
Model W1836 (For Machines Mfd. Since 04/15)
O
PE
R
ATIO
NS
The included MT#2 spur center installs into the headstock
spindle with a taper fit. Clean the mating surfaces of the
center and spindle carefully to ensure a proper fit.
Installing/Removing.
Headstock.Center
1. DISCONNECT MACHINE FROM POWER!
2. Always make sure mating surfaces of center and
spindle are free of debris or oily substances before
inserting center to ensure a good fit and reduce
runout.
3. Insert tapered end of center into spindle, and push it
in with a quick firm motion (see
Figure 22).
4. Make sure center is securely installed by attempting
to pull it out by hand—a properly installed center
will not pull out easily.
Installing.Headstock.Center
1. DISCONNECT MACHINE FROM POWER!
2. Hold a clean rag under spindle or wear leather glove
to catch center when you remove it.
3. Insert knock-out bar through outboard end of spindle
and firmly tap back of center, catching it as it falls
out (see
Figure 23).
Removing.Headstock.Center
Figure 22. Example of inserting spur
center into a spindle.
Figure
23
. Example of removing spur
center using knock-out bar.
