-15-
Model W1836 (For Machines Mfd. Since 04/15)
SE
TU
P
The Model W1836 comes mostly assembled from the
factory. The quill handwheel handle, tool holder, and cord
holders must be attached to complete assembly.
To.complete.assembly,.do.these.steps:
1. Attach quill handwheel handle to quill handwheel
with (1) M6-1 X 10, 7 X 44 shoulder bolt (see
Figure
10).
Assembly
Figure.10.
Quill handwheel handle
installed.
Quill
Handwheel
Handle
Figure.11.
Tool holder and cord holder
installed.
Tool
Holder
Cord
Holders
2. Attach cord holder brackets to back of lathe bed with
(4) M5-.8 X 12 Phillips head screws and (4) 5mm flat
washers (see
Figure 11).
3. Attach tool holder to back of lathe bed using (2)
M5-.8 X 12 Phillips head screws and (2) 5mm flat
washers (see
Figure 11).
