Shop fox W1742, Manual Insert

Page: 25 / 90

-25-
Model W1742H (For Machines Mfd. Since 01/20)
PA
RT
S
Labels & Cosmetics
W1742H
WARNING
EYE / RESPIRATORY
INJURY HAZARD!
Always wear safety
glasses and a
respirator when
using this machine.
WARNING
READ and UNDERSTAND
MANUAL to avoid serious
injury! If a manual is not
available, DO NOT use
machine! Instead, go to
www.shopfox.biz or call
(800) 840-8420.
WARNING
ACCIDENTAL
INJURY HAZARD!
Disconnect power
supply before
adjustments, setup
or maintenance!
Do not open this cover while machine
is connected to power or is running.
Disconnect power before servicing.
Failure to comply will result in serious
personal injury.
WARNING!
Only shift gearbox when
planer is running.
Neutral
30 FPM 16 FPM
MODEL W1742H 15" PLANER
w/MOBILE BASE & HELICAL CUTTERHEAD
Motor: 3 HP, 240V, 1-Phase, 60 Hz
Full-Load Current Rating: 15A
Cutterhead: Helical w/Indexable Inserts
Cutterhead Speed: 4800 RPM
Cutterhead Diameter: 3"
Number of Inserts: 75
Replacement Inserts: D4655
Insert Size: 15 x 15 x 2.5mm
Max Depth of Cut: 1/8"
Min Stock Thickness: 3/16"
Specifications
Date
S/N
Mfd. for Woodstock in China
WARNING!
To reduce the risk of serious injury when using this machine:
208624
Min Stock Length: 8"
Max Stock Thickness: 8"
Max Cutting Width: 15"
Feed Rates: 16 & 30 FPM
Weight: 600 lbs.
1. Read and understand owner’s manual before operating.
2. Always wear approved safety glasses and respirator.
3. Disconnect power before changing blades, removing parts, or
doing maintenance, service, or adjustments.
4. Only plug power cord into a grounded outlet.
5. Do not wear loose clothing, gloves, jewelry, or other items that
can get entangled. Tie back long hair and roll up sleeves.
6. Ensure machine is correctly set up before starting.
7. Do not plane two boards of varying thickness at the same time.
8. Never plane material smaller than 8" long or 3/16" thick.
9. Do not allow hands or clothing to get pulled into cutting area
while feeding workpiece.
10. Stand clear of board ends during cutting operation.
11. Do not plane boards with cracks, loose knots, or other defects.
12. Knives are sharp! Use extreme caution when changing/adjusting.
13. Never reach into cutting area while machine is running.
14. Keep fingers clear of pinch point between stock and table.
15. Do not operate when tired or under influence of drugs or alcohol.
16. Do not expose to rain or use in wet locations.
17. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
Do not open this cover while machine
is connected to power or is running.
Disconnect power before servicing.
Failure to comply will result in serious
personal injury.
WARNING!
502
510
505
506
507
500
508
509
503
504
513
504
514
515
516
Check the oil level in
the gear box before
operating machine.
Refer to the manual
for instructions.
Safety labels warn about machine hazards and how to prevent serious personal injury. The owner
of this machine MUST maintain the original location and readability of all labels on this machine.
If any label is removed or becomes unreadable, REPLACE that label before allowing machine to
be operated again. Contact us at
(
360
)
734-3482 or www.woodstockint.com to order new labels.
REF PART # DESCRIPTION REF PART # DESCRIPTION
500 X1742H500 SHOP FOX NAMEPLATE - LARGE 508 X1742H508 EYE PROTECTION/RESPIRATOR LABEL
502 X1742H502 SHIFT GEARS LABEL 509 X1742H509 DISCONNECT 220V LABEL
503 X1742H503 MACHINE ID LABEL 510 X1742H510 PINSTRIPE TAPE
504 X1742H504 CLOSE DOOR LABEL 513 X1742H513 TOUCH-UP PAINT, SHOP FOX WHITE
505 X1742H505 MODEL NUMBER LABEL 514 X1742H514 TOUCH-UP PAINT, SHOP FOX BLACK
506 X1742H506 READ MANUAL LABEL 515 X1742H515 CHECK OIL HANG TAG
507 X1742H507 ELECTRICITY LABEL 516 X1742H516 INVENTORY COMPONENTS HANG TAG
W1742H Machine Labels
(03/03/20)
• All other labels are the same as the W1742
• 1:1 Scale (Labels are actual size)
• Labels must be made of
chemical-resistant material
W1742H
COPYRIGHT © WOODSTOCK INTERNATIONAL, INC.
FOR SHOP FOX MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Woodstock will not accept labels changed without
approval. If artwork changes are required, contact us immediately at
manuals@woodstockint.com.
SF BLACK RAL 9005
COLOR CODES
PANTONE 151 C or RAL 2005 WARNING
SF LOGO RED
PANTONE 1795C
SF LOGO YELLOW
PANTONE 600C
DANGER PANTONE 485 C or RAL 3001
***IMPORTANT***: Labels marked *** must have individual letters/numbers.
Do not print with clear background. All other labels and placement are same as W1742.
***
MODEL W1742H 15" PLANER
w/MOBILE BASE & HELICAL CUTTERHEAD
Motor: 3 HP, 240V, 1-Ph, 60 Hz
Full-Load Current Rating: 15A
Cutterhead: Helical w/Indexable Inserts
Cutterhead Speed: 4800 RPM
Cutterhead Diameter: 3"
Number of Inserts: 75
Replacement Inserts: D4655
Insert Size: 15 x 15 x 2.5mm
Max Depth of Cut: 1/8"
Min Stock Thickness: 3/16"
Specifications
Date
S/N
Mfd. for Woodstock in China
WARNING!
To reduce the risk of serious injury when using this machine:
208624
Min Stock Length: 8"
Max Stock Thickness: 8"
Max Cutting Width: 15"
Feed Rates: 16 & 30 FPM
Weight: 600 lbs.
1. Read and understand owner’s manual before operating.
2. Always wear approved safety glasses and respirator.
3. Disconnect power before changing blades, removing parts, or
doing maintenance, service, or adjustments.
4. Only plug power cord into a grounded outlet.
5. Do not wear loose clothing, gloves, jewelry, or other items that
can get entangled. Tie back long hair and roll up sleeves.
6. Ensure machine is correctly set up before starting.
7. Do not plane two boards of varying thickness at the same time.
8. Never plane material smaller than 8" long or 3/16" thick.
9. Do not allow hands or clothing to get pulled into cutting area
while feeding workpiece.
10. Stand clear of board ends during cutting operation.
11. Do not plane boards with cracks, loose knots, or other defects.
12. Knives are sharp! Use extreme caution when changing/adjusting.
13. Never reach into cutting area while machine is running.
14. Keep fingers clear of pinch point between stock and table.
15. Do not operate when tired or under influence of drugs or alcohol.
16. Do not expose to rain or use in wet locations.
17. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.