-13-
Model W1727 (For Machines Mfg. Since 5/09)
SE
TU
P
Power Connection
Before the machine can be connected to the power
source, an electrical circuit and connection device must
be prepared per the
POWER SUPPLY
section on
Page 8
,
and all previous setup instructions in this manual must be
complete to ensure that the machine has been assembled
and installed properly.
Always make sure the machine is turned
OFF
before con-
necting power.
Insert the plug attached to the machine power cord into
a matching power supply receptacle. The machine is now
connected to the power source.
If you need to disconnect the machine from power later,
pull the plug completely out of the receptacle.
