-25-
Model W1823 (Mfg. Since 9/10)
O
PE
R
ATIO
NS
An RF (radio frequency) remote control receiver (
Figure
32
) and hand-held control (
Figure 33
) allow the dust
collector to be turned
ON
and
OFF
from more than
75-feet away or from another room. The range will vary
depending upon the density of materials between the
receiver and the control, and the power level of the
battery in the remote.
Note:
If you need to have one remote simultaneously
control more than one Model W1823 dust collector, you
can reprogram additional dust collector receivers to
recognize the remote control currently being used. Refer
to
Remote Control Reprogramming
on
Page 29
to do
this.
The ON/OFF buttons (see
Figure 33
) turn the dust
collector
ON
and
OFF
. The forward or backward buttons
cycle the auto shut down time from always
ON
, to timed
operation intervals of 2 hours, 4 hours, 6 hours, and 8
hours. When illuminated, the red LED lamp indicates
which timed operation mode the machine is in.
If the motor gets too hot the thermal overload on the
motor will trip, shutting the dust collector down.
If the machine overload trips during operation, do
these steps:
1.
Verify that cooling around the motor is not
obstructed and improve ventilation if restricted.
2.
Let the motor and electrical circuit cool for 30
minutes.
3.
Press the motor reset button (see
Figure
34
), then
press the ON
button on the remote control to restart
the dust collector.
4.
If the reset button does not function the first time,
repeat
Steps 1–3
as needed until the dust collector
turns
ON
.
Remote Control
Operation
Receiver
(In Magnetic
Switch Box)
Figure 32
. Remote control receiver.
Figure
33
.
RF remote control.
On/Off Buttons
Hour Intervals
Back
Button
Forward
Button
Figure
34
.
Reset button on motor.
Motor
Reset
Button
Summary of Contents for SHOP FOX W1823
Page 41: ...Model W1823 Mfg Since 9 10...
