Shop fox SHOP FOX W1688, Instruction Manual

Page: 30 / 48

OPERATION
-28-
Figure 48.
DO NOT sand wood with sharp cor-
ners at the leading-edge of the sanding opera-
tion. The belt can grab and throw the wood.
Figure 49.
ALWAYS sand wood with sharp
corners at the trailing-edge of the sanding
operation.
5.
Set the miter gauge to the needed angle.
6.
Set the workpiece on the table and against
the miter gauge. See
Figure 49
.
7.
Carefully sand the wood with sharp
corners at the trailing-edge of the sanding
operation. See
Figure 49
.
DO NOT sand a workpiece with the sharp cor-
ners at the leading-edge of the sanding opera-
tion. The belt can grab and propel the work-
piece causing injury. See Figure 48.