Shop fox SHOP FOX W1688, Instruction Manual, Page: 25 / 48

ADJUSTMENTS
-23-
Main Table Height
Periodically through normal operation of the
Model 1688 Edge Sander, the belts will wear in
certain areas. To compensate for this wear and
ensure consistent sanding or to adjust for a
workpiece, you can adjust the main table high-
er or lower. The table is fitted with springs to
make the adjustment quick and easy.
To adjust the table height, do these steps:
1.
With one hand, hold the main table, and with
the other hand loosen the main table lock
levers. See
Figure 36
.
3.
Raise or lower the main table to the desired
height, and tighten the main table lock
levers. Figure 36.
Hold the main table and loosen the
lock lever.