MGP34 Operator Manual
Supreme Bench Sander
4
INSTALLATION
The Supreme Bench Sander should be located on a flat, firm surface, in an area
free of obstructions that could interfere with the safe operation of the equipment.
The Bench Sander should be positioned and leveled on a solid bench or stand to
obtain quiet operation with a minimum of vibration.
DUST COLLECTOR HOSE
(on model with dust collecting system):
A dust collector hose has been provided with grinder. Mount the hose by sliding
both ends over the exhaust port and the exhaust on the side of the blower
housing. Tighten the hose collars.
DANGER:
Be sure to empty dust bag frequently.
SANDING WHEEL ON BAYONET:
Install the sanding wheel on the motor shaft. Slide the narrow side of the
bayonet into the hole at the end of the motor shaft. The bayonet will lock in place
just by turning it in the motor shaft.
WARNING:
All electrical work must be performed by a qualified
electrician and must conform to all state and local
ordinances.
Do not, under any circumstances, tamper with, modify,
or adapt the electrical plug and cord provided with this
machine.
GROUNDING INSTRUCTIONS
WARNING:
Improper connection of equipment grounding conductor
can result in the risk of electrical shock. Equipment
should be grounded while in use to protect operator
from electrical shock.
•
Check with a qualified electrician if grounding instructions are not
understood or if in doubt as to whether the tool is properly grounded.
