Shivvers Circu-Lators I, Installation Manual

Page: 41 / 43

Two 632-191A (Safety Lock Kits) are provided with each Shivvers dryer. This kit
includes an H-2055 Padlock, P-11158 Self Laminating Lockout Decal, and hardware
which will allow locking of any bin entrance point.
Make sure a grain drying main disconnect box is installed and that this padlock
works on it. If it doesn't, find one that will or contact Shivvers Manufacturing, Inc. for
assistance. Leave the power locked off.
If the dryer bin is not equipped with a lockable entry door in good condition, attach
one end of the cable assembly to the bin side wall. Use an existing bolt, or use the
hardware provided. Attach the staple plate to the bin entrance door within reach of
the opposite end of the cable assembly. Use the hardware provided, or weld the
staple plate securely to the door.
Install a safety lock kit on the manhole cover also. If there are more than two
entrances on the bin, order additional Safety Lock Kits. Try the locks and make sure
entrance to the bin is denied.