Shively Labs 6842, Instruction Manual Installation, Operation, & Maintenance

Page: 19 / 64

11
Bay Assembly
2 Bay Assembly
Attach the bay arms
(antennas without

de-icers).
[for single bay antennas and 1/2-wave-spaced antennas only]
a. Using 1/4-20 x 1-3/4" hardware ( Figure 9 a, 2 , 3 , and 4 ), attach the four
antenna arms ( 5 ) to the innermost pair of holes on the boom ( 1 ) mounting
stubs.
[for 2- to 8-bay full-wave-spaced antennas only]
b. Using 1/4-20 x 1-3/4" hardware ( Figure 9 b, 2 , 3 , and 4 ), attach the four
antenna arms ( 5 ) to the outermost pair of holes on the boom ( 1 ) mounting
stubs.
c. Tighten the hardware before continuing.
Figure 9. Attaching the arms