2
Press to begin, answer
and end a telephone call.
Call button
Clear / On-Off /END button
The Handset and Base Unit
Press to enter menu
mode and enter sub-
menu. With the key
" " to lock or unlock
the keypad.
Press during a call to
mute the microphone
MENU/ Mute button
UP/DOWN button
In standby mode, press to
show phonebook list;
Press during programming
to move through the
menu. Press during a call
to change the volume in
the earpiece.
Recall button
You can activate
Recall function if your
phone is connected to
a PABX, or if you use
Select Services. Press
to transfer an outside
call to another phone.
PHONEBOOK/OK button
In standby mode, press to
enter phonebook menu. Press
to confirm selection.
Press and hold (2-3 seconds) to
switch the handset on and off.
Press during programming to go
back to the previous option, or to
clear digits one by one from the
display. Press to end the call.
IN USE light
The IN USE light comes on when you
have a connection to the telephone
line.
HANDSET LOCATOR button
Press this to make the handset ring,
if you cannot remember where you put
it. Press it again to stop the handset
ringing.
INT button
Press to make an intercom call (if
you have more than one handset)
Before you can use the handset to
make calls for the first time, you
will need to fit and fully charge the
battery for 15 hours.
Press to begin and
answer the call
