GB-IE
01
Assembly instructions:
These instructions are for your safety. Please read through them thoroughly before use.
Treat all the parts before assembly – see page 5!
GB-IE The
“Panel Layout”
is showing you how to position the panels.
The
Pent Panels FIT INSIDE THE DOOR AND PLAIN PANELS!
Floor Panel
(A2162)x01
A5
60
3
Panel Layout
A2166
Drill
t
he
Floor Panel (A2162)
as shown below. Then fix the
Shed Floor (A2163)
to it using 3x
60mm
Screws (A0035)
using the pilot holes you just drilled.
Carefully turn over the floor and put it on your
base.
12
A2162
5mm
If using a drill or
electric screwdriver
carefully but firmly
push the opposite end
to the screwdriver bit
into the screw head and keep the
pressure on to prevent the
screwdriver spinning in the screw.
NOTE
Some holes
drilled for
later use
Shed Floor
(A2163)x01
A2166
A5
60
2
A5
60
5
A5607
A5606
A2163
A2164
60mm Screws
(A0035)x03
