6
REAR PANEL
REAR PANEL
1. DC POWER INLET
The switcher is
fi
tted with a DC power plug-park input connector.
Please ensure that the plug-park used is of an approved type and
is of suf
fi
cient current carrying capacity with the correct voltage
and connector polarity. 12Volt DC power supply 2A Max.
2. IR EXTERNAL IN (EXT. IR TO CONTROL SWITCHER)
Support one of IR Extender to control Switcher Extend distance
maximum 300 Meters / ~1000 feet When you plug the External IR
extender into the switcher, the front panel IR receiver remain active.
3. RS-232 CONNECTION
RS-232 control port to allow for interfacing to a PC, Such as a
computer or touch panel control, to the switcher via this DB-9pin
Female connector for serial RS-232 control.
4. INPUTS - 1~8 VGA-RGBHV-AUDIO PORTS
Connect a signal 8x sources of VGA (RGBHV) & Stereo Audio
player device to 8x VGA/Audio outputs matrix switcher.
5. OUTPUTS - 1~8 VGA-RGBHV-AUDIO PORTS
Connect 8x VGA(RGBHV) & Stereo Audio via 8x VGA cable
to VGA Monitor displays and Audio speaker devices.
Power Jack:
DC Jack - Inner OD
ᴓ
2.1mm (+ )
Outside OD
ᴓ
5.5mm (GND)
Power input - 12VDC, 2A
Switcher power suppler use universal
Part number : TA 007
IR Extender Jack:
Female Jack - inner OD
ᴓ
3.5 mm
Remote port :
DB-9pin Female connector
VGA (RGBHV) Via 1x HD-15p connector
Stereo Audio(AR/AL) Via 1x
ᴓ
3.5mm
Ear phone jack connector
Note: VGA input : With 1x HD-15F female
connector. Audio input : With 1x Stereo Ear
phone Jack
VGA (RGBHV) Via 1x HD-15p connector
Stereo Audio(AR/AL) Via 1x
ᴓ
3.5mm
Ear phone jack connector
Note: VGA input : With 1x HD-15F female
connector. Audio input : With 1x Stereo Ear
phone Jack