RS-232 SERIAL INTERFACE
RS-232 SERIAL INTERFACE CONNECT A PC OR CONTROL SYSTEM. VERSION COMPATIBLE V2.0
For a complete list of commands, please reference external document extended RS-232 Protocol Instruction Manual.
RS-232 PROTOCOL COMMANDS ( RS-232 CONTROL DRIVER V2.0.1 )
The ShinybowUSA switcher can be controlled via the RS-232 serial control port to allow for interfacing to a PC, or similar third party control
system.
The serial communication parameters are 9600 baud, 8 bit, No Parity and 1 stop bit - this is often referred to as 9600 8N1.
When the unit recognizes a complete command it will perform the requested action - there is no delimiter character required.
11
Pin
RS-232
Defi nition
1 ------ Not
used
2
TX
Transmitter
3
RX
Receiver
4 ------ Not
used
5
GND
Ground
6
------ Not
used
7
------ Not
used
8
------ Not
used
9
------ Not
used