Shinybow USA SB-6355, Instruction Manual, Page: 7 / 20

5
TRANSMITTER BACK PANEL
BACK PANEL
1. POWER INPUT:
DC48V, 1A, (Din-4pins Male Plug).
2. RS-232 I/O:
Send RS-232 via HDBaseT™ CATx cable.
3. SPDIF OUTPUT:
Receive the SPDIF signal from HDBaseT™
Receiver via HDBaseT™ CATx cable.
4. SPDIF INPUT:
Send the SPDIF signal to HDBaseT™ Receiver via
HDBaseT™ CATx cable.
5. HDBaseT™ OUTPUT (Transmitter):
HDBaseT™ send HDMI
Source signal to Receiver via HDBaseT™ RJ-45
connector.
6. HDMI INPUT:
HDMI signal Input.
7/8. AUDIO INPUT:
Extra Stereo Audio signal Input.
9/10. LAN I/O:
LAN controls I/O.
11. IR OUTPUT:
Receive Bi-directional IR signal from HDBaseT™
Receiver to Control source device.
12. IR INPUT:
Send Bi-directional IR signal to HDBaseT™ Receiver
to Control destination device.