Shinybow USA SB-6355 Instruction Manual Download Page 3

Page: 3 / 20

CONTENTS

INTRODUCTION ..............................................................1
FEATURES & CONTENTS ................................................ 2
SPECIFICATIONS ........................................................... 3
TRANSMITTER PANELS ................................................ 4
RECEIVER PANELS ....................................................... 6
IR PIN CONFIGURATION ............................................... 8
RS-232 PIN CONFIGURATION ...................................... 10
TYPICAL HDBaseT™ APPLICATION ........................... 12
RACK MOUNTS (OPTIONAL) ....................................... 13
WALL MOUNT APPLICATIONS .................................... 15

INTRODUCTION

Congratulations on your purchase of one of the most innovative
HDMI 1.4a over single category cable HDBaseT™ Transmitter/
Receiver with POH (Power Over HDBaseT™) on the market
today. SB-6355T HDBaseT™ Transmitter can transmit the HDMI,
Ethernet, PoE with power (48VDC), IR Remote signals input to
Receiver or output to destination and the RS-232 interface signal
I/O to HDBaseT™ Receiver SB-6355R via single LAN (category)
cable for the long distance Maximum 328 feet (100M). Transmitter
use the single UTP/FTP (category cable) CAT6, CAT6a or CAT7
via RJ-45 8P8C female socket (Support 568a/b). This product
provide higher full HD HDMI 1.4a, Resolution supports 480i/p,
720p,1080i/p or High full 4K2K-30Hz/24bpp, 4K2K-60Hz/24bpp
with 4:2:0 pixel fromet quality that are identical to the source high
quality full HDMI 1.4 signals. The Transmitter is useful for sending
the 4K2K HDMI digital Video / multi-channel digital audio format,
IR remote in or out, Ethernet, RS-232 in-out, KVM (USB2.0) and
48VDC power over HDBaseT™ (PoH) to HDBaseT™ Receiver.
Controls signals via Single category cable transmit to the
HDBaseT™ Transmitter and HDBaseT™ Receiver.

HDBaseT™ with PoH 100M EXTENDER Series

Thank you for purchasing the SB-6355x Kit HDBaseT™ with PoH Transmitter and Receiver. You will find this unit easy to

install and highly reliable but it is essential that you read this manual thoroughly before attempting to use the converter.

TABLE OF CONTENTS

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
•   Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
• To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
•   Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
•  Use only the supplied power supply unit (PSU). Do not use the
PSU if it is damaged.
•  Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.

DISCLAIMERS

The information in this manual has been carefully checked and
is believed to be accurate. We assume no responsibility for any
infringements of patents or other rights of third parties which may
result from its use.

We assume no responsibility for any inaccuracies that may be
contained in this document. We make no commitment to update
or to keep current the information contained in this document.

We reserve the right to make improvements to this document
and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer file, in any form or by any means
— electronic, mechanical, magnetic, optical, chemical, manual,
or otherwise — without express written permission and consent

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may
be trademarks of the companies with which they are associated.