PIN CONFIGURATION:
SB-101 and SB-101C Transmitter Pin configuration
1. SB-101 IR 300M Transmitter
Device Cable (3C) IR Transmitter (SB-101)
SB-101
Maximum Distance ~ 984 feet (300M)
SB-101C Maximum Distance ~ 6 feet (2M)
SB-101
IR Transmitter Set
R oHS /95/E C
DC 12V
IR out
From
Receiver
IR in
To
Receiver
CAT6/6a/7
OUTPUT
SB-101
Maximum Distance ~ 984 feet (300M)
SB-101
IR Tx
SB-101C
Transmitter Cable
IR Transmitter cable 6ft (2M)
SB-101C
Maximum Distance ~ 6 feet (2M)
R oHS /95/E C
DC 12V
IR out
From
Receiver
IR in
To
Receiver
CAT6/6a/7
OUTPUT
SB-101C
IR Tx
SB-101
IR Transmitter Set
Note: The External IR jack has voltage on the “Ring” portion of a 3-conductor plug. You must use a 3-conductor plug (aka: stereo plug).
Using a 2-conductor plug will short out the power supply. Always make connections with the switcher power off.
*** When you plug the External IR extender into the switcher, the front panel IR transmitter remains active. ***
IR Transmitter cable 6ft (2M)
SB-101C
Transmitter Cable
2. SB-101C IR 2M Transmitter
Device Cable (3C) IR Transmitter (SB-101C)
VCC (Ring)
Signal (center)
GND (Sleeve)
Tip Ring
Sleeve
Tip: Signal
Ring :VCC
Sleeve: GND
Ring
Tip (center)
Sleeve
Signal (center)
GND (Sleeve)
Tip Ring
Sleeve
Tip: Signal
Ring: NC
Sleeve: GND
Ring
Tip (center)
Sleeve
IR ExTENDER
6
IR ExTENDER
