RS-232 SERIAL INTERFACE CONNECT A PC OR CONTROL SYSTEM. VERSION -2.0 COMPATIBLE
RS-232 SERIAL INTERFACE
Pin
RS-232
Definition
1
--------
Not used
2
TX
Transmitter
3
RX
Receiver
4
--------
Not used
5
GND
Ground
6
--------
Not used
7
--------
Not used
8
--------
Not used
9
--------
Not used
RS-232 PROTOCOL COMMANDS (RS-232 CONTROL DRIVER V2.0.1)
The Shinybow switcher can be controlled via the RS-232 serial control port to allow for interfacing to a PC, or similar third party control
system.
The serial communication parameters are 9600 baud, 8 bit, No Parity and 1 stop bit - this is often referred to as 9600 8N1. When the unit
recognizes a complete command it will perform the requested action - there is no delimiter character required.
18
RS-232 SERIAL INTERFACE
