8
Before making any connections to the switcher, observe the following:
•
Ensure the mains voltage supply matches the label on the supplied plug- Pack (+/- 10%).
•
Ensure that the power switch is OFF.
•
Ensure that all system grounds (earth) are connected to a common point.
•
Avoid powering equipment within a system from multiple power sources that may be separated by large distances.
•
Connect all audio video sources and destination equipment.
•
Power up all source and destination audio-visual sources.
•
For each destination output, select the appropriate input source by using the front panel input 1~8 select buttons. The supplied IR remote
control or through the RS-232 serial communications port.
•
Upon power up the switcher will return to its last used setting before Powered down.
REMOTE CONTROL
IR REMOTE CONTROL KEY :
1. / 2. SWITCH 1 POWER ON or OFF:
Controller with a separate power ON and OFF
3. DESTINATION : 1 thru 8 OUTPUT SELECTION:
Press the destination button to select the output display channel.
4. SOURCE : 1 thru 8 INPUT SOURCE SELECTION:
Press input 1~8 sources with selection button
5. FUNCTION KEY:
Function selection button
ALL OFF EDID RECALL
MEMORY ENTER LOCK
REMOTE CONTROL
