manualshive.com logo in svg

Shinybow USA SB-5688K, Instruction Manual

Share
Download
Shinybow USA SB-5688K Instruction Manual Download Page 9

FRONT PANEL

FRONT PANEL

13. FUNCTION KEY - ALL

Disables (mute) video on all destinations OR assign the same source to all destinations.

Option 1

- Press 

ALL

 followed by 

OFF 

button. The display will show ”0” to indicate none of the destinations are assigned a video source.

Option 2

- Press 

ALL

 followed by Source 1 thru 8. The display will show the Source selected.

- Press 

ENTER 

The pre-set source selection will be assigned all destinations.

14. FUNCTION KEY - OFF

Disables (mute) video on the selected destinations.

- Press 

OFF

 button followed by any Destination channel.

- Press 1 thru 8 output destination. The display will show “ 0 “ for the selected channel, indicating no video selected.

15. FUNCTION KEY - LOCK

- Press and hold LOCK button for two seconds lockout the front panel.
- Press and hold LOCK button for two seconds to enable the front panel.

16. FUNCTION KEY - ENTER

Press 

ENTER

 to confi rm entries.

7

Summary of Contents for SB-5688K






















Reviews:

No comments

Brands by name

Popular brands

Load more brands