FRONT PANEL
FRONT PANEL
1. POWER ON SWITCH
The power switch turns the unit on and off. The LCM will illuminate blue to indicate the switcher is ON and receiving power. The switcher
will remember the last setting during a power cycle. When power is removed and resorted, the last confi guration will be evoked.
2. STATUS DISPLAY
Front panel status display shows current matrix routing confi guration. This same display also shows particular confi guration settings
depending on your current function. In run mode (as shown above), the display shows each Output (destination) Channel shows which
input (source) is assigned.
3. IR SENSOR
The IR sensor receives IR commands from the supplied remote controller or third party IR emitter.
4. INPUT STATUS DISPLAY
Input sources 1 to 8 LED illuminates blue to indicate that a video source is present on that input.
5. SOURCE SELECT BUTTONS
Separate inputs 1 thru 8 select buttons are provided each source selection.
6. EDID MODE SELECT BUTTONS
Used to select EDID mode using buttons Source button
#1
or
#2
.
7. DESTINATION SELECT BUTTONS
Separate outputs 1 thru 8 select buttons are provided for each destination assignment.
Routing can be Source to Destination or one source to multiple destinations.
Example :
Press Destination 1,3,5 then press Source 2 will route Input 2 to Output 1,3,5 respectfully.
8. 19 INCH EAR MOUNT PAIR
Converts desktop to 19 inch rack mount. Bracket (part # 2U-440L) INCLUDED. Image shows rack mount bracket attached.
5
