Shinybow USA SB-5688CAK, Instruction Manual, Page: 22 / 32

LEARNING EDID SINGLE TO SINGLE Learning Destination #2 EDID To Source #3
Step 1. Press
EDID
button
The button will flash blue and the display will show the current Embedded EDID Status.
Step 2. Press the
DESTINATION #2
button row
Copy the Destination #2 Display EDID.
Step 3. Press the
SOURCE #3
button row
Learning the Destination #2 EDID To Source # 3.
Step 4. Press
ENTER
button
To confirm entries.
LEARNING EDID SINGLE TO MULTIPLE Learning Destination EDID Link To The Majority Sources
Step 1. Press
EDID
button
The button will flash blue and the display will show the current Embedded EDID Status.
Step 2. Press the
DESTINATION 1-8
button row
Copy any 1~8 Destinations EDID.
Step 3. Press the
SOURCE 1-8
button row
Learning the Destination EDID link to source #1-8.
Step 4. Press
ENTER
button
To confirm entries.
LEARNING EDID SINGLE TO ALL Learning Destination EDID Link To All Sources
Step 1. Press
EDID
button
The button will flash blue and the display will show the current Embedded EDID Status.
Step 2. Press destination button
1 THRU 8 Learning anyone 1~8 Destination EDID to all sources.
Step 3. Press
ALL
button
Learning selected destination EDID to all sources.
Step 4. Press
ENTER
button
To confirm entries.
LEARNING EDID DEFINITION Learning EDID From Destination To Source
1. Switcher will LEARN destination EDID and pass the selected source.
2. To set up learning between a single destination and single source: Press
EDID
button > Press
DESTINATION 1 THRU 8
> Press
SOURCE 1
THRU 8
> Press
ENTER
to confirm. Switcher will learn destination EDID to source device.
3. To set up learning between a single destination and multiple sources: Press
EDID
button > Press
DESTINATION 1 THRU 8
> Press the
majority
SOURCES 1 THRU 8
> Press
ENTER
. Switcher will learn single destination EDID to many source devices.
4. How to Learning single destinations with all sources. Press
EDID
button > Press
ALL
button > Press
ENTER
to confirm.
AUTO MODE DEFINITION Common Resolution And Audio
Switcher will find the highest common resolution and Audio from all destination EDID to link Sources.
Example for Single Source: Destination > Press
#1
and then Source > press
#1
. Destination device #1 will set to the highest common
resolution and Audio of source #1
Example for Multiple Sources: Destination device #1, #2, #3 will be set to the highest common resolution and Audio available and
source device #1 will output this same resolution.
LEARNING EDID Learning EDID from Destination to Source
Press
EDID
>
DESTINATION
Button: The LCM will be show LEARNING.
Switcher will LEARN destination HDMI EDID and pass the selected source.
Learning EDID setup for HDMI:
Key Sequence:
EDID > DESTINATION # > SOURCE # > ENTER
The EDID for HDMI has been learned.
Switcher will LEARN destination HDBaseT
™
CATx EDID and pass the selected source.
Learning EDID setup for HDBaseT
™
CATx:
Key Sequence:
EDID
>
DESTINATION #
>
DESTINATION #
>
SOURCE #
>
ENTER
Again, Press the same DESTINATION # to learn HDBaseT
™
CATx EDID The EDID for
HDBaseT
™
CATx has been learned.
NOTE: The already learned EDID cannot be modified. You can only rebuild a new Learning EDID.
For Example: When the Source has “Learned” the EDID data from a destination, It will save that EDID information into EPROM and the
EDID data cannot change. Please select new learning destination to sources or change to one of the embedded EDID modes when you
want to remove the learning EDID memory from EPROM.
20
EDID FUNCTION