1. DC POWER INLET:
The switcher is fitted with an AC power plug
input connector. Ensure that it is of an approved type and is of
sufficient current carrying connector capacity with the correct
voltage and connector polarity. 100~240Volt AC, 50/60Hz power
supply.
2. IR EXTENDER CONTROL:
Supports one IR extender. Extends
a maximum distance of ~984 feet/300M. When you plug the
external IR extender into the switcher, the front panel IR receiver
remains active.
3. RS-232 CONNECTION:
RS-232 control port allows for interfacing
to a PC, such as a computer or touch panel control, to the switcher
via this DB-9pin female connector for serial RS-232 control.
4. ETHERNET CONNECTION:
ETHERNET control port allows for
TCP/IP interfacing to a PC, such as a computer or touch panel
control (not a web-browser), to the switcher via the RJ-45 female
connector to control switcher.
POWER SOCKET:
Connector Type: IEC 60320 C13
IR EXTENDER JACK:
Female Jack - inner OD Ø 3.5mm
REMOTE PORT:
D-SUB-9pin female connector
REMOTE PORT:
Control the switcher RJ-45 female
connector
ETHERNET PORT:
Note: The Ethernet port and RS-232 port CANNOT
be used simultaneously. Any connection to the
Ethernet port will disable serial commands sent
to the RS-232 port.
10
BACK PANEL-SWITCH CONTROLS
BACK PANEL-SWITCH CONTROLS