5
REMOTE CONTROL & REMOTE PROTOCOL COMMANDS
Before making any connections observe the following:
• Ensure the mains voltage supply matches the label on the supplied plug- Pack (+/- 10%).
• Ensure that the power switch is OFF.
• Ensure that all system grounds (earth) are connected to a common point.
• Avoid powering equipment within a system from multiple power sources that may be separated by large distances.
• Connect all audio video sources and destination equipment.
• Power up all source and destination audio-visual sources.
• For each destination output select the appropriate input source by using the front panel input 1-8 select buttons. The supplied IR
remote control. Or through the RS-232 serial communications port.
• Upon power up the switcher will return to its last used setting before Powered down.
REMOTE CONTROL
IR REMOTE CONTROL KEY :
IR REMOTE :
SW-5608
1. & 2. SWITCH POWER ON or OFF:
Controller with a power ON and OFF
3. SOURCE : 1 thru 8 INPUT SOURCE SELECTION:
Press input 1~8 sources with selection button
IR REMOTE CUSTOM AND DATA CODES (NEC Standard)
HOW TO SETUP IR CODES :
CUSTOM CODE : 28D7
POWER ON : 28D7 0BF4
PRESS SOURCE - #
SOURCE #1 : 04FB
SOURCE #2 : 05FA
SOURCE #3 : 06F9
SOURCE #4 : 0DF2
SOURCE #5 : 1EE1
SOURCE #6 : 00FF
SOURCE #7 : 1BE4
SOURCE #8 : 18E7
For example; Select source to show Source #1~8 on display,
The IR Data Code list :
SOURCE #1 : 28D7 04FB
SOURCE #2 : 28D7 05FA
SOURCE #3 : 28D7 06F9
SOURCE #4 : 28D7 0DF2
SOURCE #5 : 28D7 1EE1
SOURCE #6 : 28D7 00FF
SOURCE #7 : 28D7 1BE4
SOURCE #8 : 28D7 18E7