4
BACK PANEL
BACK PANEL
1. DC POWER INLET:
The switcher is fitted with a DC power plug input
connector. Ensure that the plug used is of an approved type and
is of sufficient current carrying connector capacity with the correct
voltage and connector polarity. 12Volt DC power supply 3A Max
(Center pin positive).
2. IR EXTENDER CONTROL:
Supports one IR extender. Extends a
maximum distance ~1000 feet/300M. When you plug the external
IR extender into the switcher, the front panel IR receiver remains
active.
3. RS-232 CONNECTION:
RS-232 control port allows for interfacing to
a PC, such as a computer or touch panel control, to the switcher via
the DB-9pin female connector for serial RS-232 control.
4. INPUTS- 1,2,3,4,5,6,7,8 HDMI:
Connects a HDMI digital video/audio
signal link direct to the female HDMI connector. This connector
supports HDMI digital video/audio and DVI digital video sources.
HDMI Digital Video/Audio. Connector with fix screws Input 1 ~ 8.
5. OUTPUTS- 1,2 HDMI:
Connects a HDMI digital video/audio signal
link direct to the female HDMI connector. This connector supports
HDMI digital video/audio and DVI digital video sources.
HDMI Digital Video/Audio. Connector with fix screws Output 1 & 2.
POWER JACK:
DC Jack - Inner OD Ø 2.1 mm (+)
Outside OD Ø 5.5mm (GND)
Power Input: 12VDC, 3A
IR EXTENDER JACK:
Female Jack - inner OD Ø
3.5mm
This port also supports firmware updates.
REMOTE PORT:
DB-9pin female connector
HDMI DIGITAL vIDEO/AUDIO CONNECTOR:
HDMI female connector.
Note: With proper adapters, the switcher
can be used with DVI digital video signals.
HDMI DIGITAL vIDEO/AUDIO CONNECTOR:
HDMI Female connector.
Note: With proper adapters, the switcher
can be used with DVI digital video signals.