28
RS-232 & ETHERNET SERIAL INTERFACE
RS-232 & ETHERNET SERIAL INTERFACE CONNECT a PC or CONTROL SYSTEM. VERSION COMPATIBLE V1.0
For a complete list of commands, please reference external document extended RS-232 Protocol Instruction Manual.
Example of the command string to select Inputs:
FUNCTION
COMMAND
COMMAND VARIABLES
Select source
Source xxx,
xxx = Input Channel (001=Source1, 002=Source2 .etc)
COMMAND EXAMPLE
RESPONSE
DESCRIPTION
Source 001,
Source 001#ok;
Select source number 1
RS-232 CONFIGURATION
RS-232 cable is a straight thru cable and not null-modem
Definition
Pin
Pin
Definition
1
1
DCD
TX
2
2
RX
RX
3
3
TX
4
4
DTR
GND
5
5
GND
6
6
DSR
7
7
RTS
8
8
CTS
9
9
RI
RS-232 Pin Diagram
RS-232 SERIAL INTERFACE PROTOCOL COMMANDS
The Shinybow switcher can be controlled via the RS-232 serial control port to allow for interfacing to a PC, or similar third party control
systems. The serial communication parameters are 9600 baud, 8 bit, No Parity and 1 stop bit - this is often referred to as 9600 8N1. When
the unit recognizes a complete command it will perform the requested action - there is no delimiter character required.
ETHERNET SERIAL INTERFACE
Pin Ethernet Reference
1
TXOP
TX +
2
TXON
TX -
3
RXIP
RX +
4
NC
5
NC
6
RXIN
RX -
7
NC
8
GND
ETHERNET TCP/IP PROTOCOL COMMANDS ( Ethernet / RS-232 Control driver V1.0)
*** The Ethernet port and RS-232 port cannot be used simultaneously. Any connection to the Ethernet Control port will disable
serial commands sent to the RS-232 port.***
SB Device
PC
Note:
Control the switcher
SPD: Speed
LINK: Ethernet link
RJ-45 Female 8P-8 Connector