23
BACK PANEL
BACK PANEL
1. POWER INLET:
The switcher is fitted with an AC power plug input
connector. Ensure that the plug used is of an approved type and
is of sufficient current carrying connector capacity with the correct
voltage and connector polarity. 100~240Volt AC, 50/60Hz power
supply included.
2. IR EXTENDER CONTROL:
Supports (1) IR Extender for a maximum
distance of up to ~984 feet/300M. When you plug the External
IR extender into the switcher, the front panel IR receiver remains
active.
3. RS-232 CONNECTION:
The RS-232 control port allows for interfacing
to a PC, such as a computer or touch panel control, to the switcher
via a DB-9pin female connector for serial RS-232 control.
4. ETHERNET CONNECTION:
The ETHERNET control port allows for
TCP/IP interfacing to a PC, such as a computer or touch panel
control (not a web-browser), to the switcher via a RJ-45 female
connector to control switcher.
POWER SOCKET :
Connector Type : IEC 60320 C13
IR EXTENDER JACK:
Female Jack - inner OD Ø 3.5 mm
This port also supports Firmware updates.
REMOTE PORT:
D-SUB-9pin female connector
REMOTE PORT:
Controls the switcher with a RJ-
45 Female connector
Ethernet Port:
Note: The Ethernet port and RS-232 port
cannot be used simultaneously. Any
connection to the Ethernet port will disable
serial commands sent to the RS-232 port.