Shinybow USA SB-3877 Instruction Manual Download Page 6

4

BACK PANEL

BACK PANEL

1. DIGITAL AUDIO OUTPUTS:

 

A separate Output-1 & Output-2 digital audio port via RCA connector is provided for each destination  output. The 

digital audio signals from HDMI Input-1 or Input-2 only.

2. HDMI OUTPUTS:

 

A separate output-1 & 2 HDMI ports with HDCP is provided for each destination output. Convert from CV/SV, YPbPR, 

VGA & HDMI  

3. STEREO AUDIO OUTPUTS:

 

A separateOutput-1 and 2 Stereo Audio signals via 2x RCA connectors is provided for each destination output.

4. VGA OUTPUTS: 

A separate Output-1 and 2 VGA (RGBHV) signals via 2x HD-15F female connectors is provided for each destination 

output. Convert from CV/SV, YPbPR, VGA & HDMI

5. INPUT- 7 & 8 AUDIO INPUTS: 

Input 7 is a stereo audio (AR/AL) with Input 7 VGA and Input 8 is a stereo audio(AR/AL) with Input 8 VGA.

6.INPUT 7 & 8 VGA INPUTS: 

Input 7 is a VGA (RGBHV) via HD-15P connector and Input 8 is a VGA (RGBHV) via HD-15P connector.

7. INPUT 5 & 6 AUDIO INPUTS:

 

Input 5 is a stereo audio (AR/AL) with Input 5 component and Input 6 is a stereo audio (AR/AL) with Input 6 

component.

8. INPUT 5 & 6 COMPONENT VIDEO INPUTS: 

Input 5 is a Component (YPbPR) via RCA connector and Input 6 is a Component (YPbPR) via 

RCA connector.

9. INPUT- 3 & 4 AUDIO INPUTS:

 Input 3 is a stereo audio (AR/AL) with Input 3 composite or S-Video and Input 4 is a stereo audio (AR/AL) 

with Input 4 composite or S-Video.

10. INPUT- 3 & 4 COMPOSITE INPUTS: 

Input 3 is a Composite Video via RCA connector and Input 4 is a Composite video via RCA connector.

11. INPUT- 3&4 S-VIDEO INPUTS:

 

Input 3 is a S-Video(Y/C) via mini-4p connector and Input 4 is a S-Video(Y/C) via mini-4p connector.

12. INPUT- 1&2 HDMI INPUTS: 

Input 1 is a HDMI (digital), HDCP compliant and Input 2 is a HDMI (digital), HDCP compliant.

13. RS-485 CONTROL: 

RS-485 control port to allow for interfacing to a PC.

14. RS-232 CONTROL:

 

RS-232 control port to allow for interfacing to a PC.

15. IR EXTENDER CONTROL:

 

A separate IR Extender for Output 1 and 2. IR EXT.- 1 is for Output-1. IR EXT.- 2 is for Output-2

16. DC POWER INLET:

 

The SB-3877 is fitted with a DC power plug-park input connector. Please ensure that the plug-park used is of an 

approved type and is of sufficient current carrying capacity with the correct voltage and connector polarity. 12Volt DC power supply 3A Max.

Summary of Contents for SB-3877













Reviews: