Shinybow USA SB-3877 Instruction Manual Download Page 3

CONTENTS 

INTRODUCTION ..............................................................1
FEATURES & SPECIFICATIONS ....................................2
FRONT PANEL .................................................................3
REAR PANEL ..................................................................4
REMOTE CONTROL ........................................................5
IR EXTENDER .................................................................6
RS-232 PROTOCOL COMMANDS ................................8

INTRODUCTION

The SB-3877 is a Multi-Video switcher featuring (8) inputs and 
(2) outputs (independent of each other) maxing this a true Matrix 

Routing  Switcher.  The  Inputs  are  comprised  of:  2x  HDMI,  2x 

Composite Video w/Audio, 2x S-Video w/ Audio, 2x Component 
video w/ Audio and 2x VGA w/ Audio. The Outputs are 2x HDMI 
w/ Digital Audio, 2x VGA w/ Audio. Note that you can use BOTH 
the VGA Output and the HDMI Output simultaneously giving you 
(2) outputs per channel for a total of (4) outputs per chassis. 

When switching between sources, the output will fade to black 
then fade-in to the new source you selected. Formats supported 
are NTSC/PAL/SECAM video systems allowing you to do format 

conversion.  Supports  High  Definition  Digital  signal  with  data 

rates enabling 1080p formats or if in PC resolution (1920x1200). 
Audio is present on all outputs regardless of selected video signal 
type and the volume control is set for either output channel, 
independent of each other. It completely eliminates the need to 
constantly move around HD input and output cables.

Control is provided via front push buttons with LED readout or IR 
remote controller. A RS-232 interface is provided for interfacing 
with third party control or use the provided software. Input cable 
equalizer enables use of long cable runs of more than 50 feet 
(15M) when using 24AWG cable at 1080i. A windows-based 
control software package is included to provide complete control 
of the SB-3877 from a PC.

PACKAGE CONTENTS

Check that you have the following components;

• 

SB-3877 Matrix Switcher  

• 

(2) IR Remote Control 

• 

(2) HDMI to DVI adapters

• 

Rack Mounts 

• 

RS-232 driver CD (All Windows Operating Systems) 

• 

Users Guide 

•  AC/DC Adapter: 12VDC, 1000mA~3000mA

AC/DC Adaptor Types : CE/UL/SAA/BS

1

MultiVideo Matrix Switcher Series

Thank you for purchasing the SB-3877 MultiVideo Matrix Switcher. You will find this unit easy to install and 

highly reliable but it is essential that you read this manual thoroughly before attempting to use this 8x2 multivideo 

switcher.

TABLE OF CONTENTS

SAFETY PRECAUTIONS 

Please read all instructions before attempting to unpack, install or 
operate this equipment and before connecting the power supply. 
Please keep the following in mind as you unpack and install this 

equipment:
•   Always follow basic safety precautions to reduce the risk of fire, 

electrical shock and injury to persons.

•  To prevent fire or shock hazard, do not expose the unit to rain, 

moisture or install this product near water.

•   Never spill liquid of any kind on or into this product.
•   Never push an object of any kind into this product through any 

openings or empty slots in the unit, as you may damage parts 
inside the unit.

•  Do not attach the power supply cabling to building surfaces.
•  Use only the supplied power supply unit (PSU). Do not use the 

PSU if it is damaged.

•  Do not allow anything to rest on the power cabling or allow any 

weight to be placed upon it or any person walk on it.

•  To protect the unit from overheating, do not block any vents or 

openings in the unit housing that provide ventilation and allow for 

sufficient space for air to circulate around the unit. 

DISCLAIMERS

The information in this manual has been carefully checked and 
is believed to be accurate. We assume no responsibility for any 
infringements of patents or other rights of third parties which may 
result from its use.

We assume no responsibility for any inaccuracies that may be 
contained in this document. We make no commitment to update 
or to keep current the information contained in this document.

We reserve the right to make improvements to this document 
and/or product at any time and without notice.

COPYRIGHT NOTICE

No part of this document may be reproduced, transmitted, 
transcribed, stored in a retrieval system, or any of its part translated 

into any language or computer file, in any form or by any means 

— electronic, mechanical, magnetic, optical, chemical, manual, 
or otherwise — without express written permission and consent

© Copyright 2015. All Rights Reserved.
Version 2.0 APR 2015

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may 
be trademarks of the companies with which they are associated.

Summary of Contents for SB-3877













Reviews: