Shintaro Wireless Vibro Speaker, User Manual

Page: 8 / 11

and press again, you can end the call.
(4). If your smart phone shows the device is connected, but no sound
when you play music or you can’t dial a phone number when you long
press , turn the smart phone Bluetooth off and turn on again, press
“True wireless stereo” record, reconnecting by hand hearing a sound
indicating connection succeeded, then play music or dial the call.
B. The two speakers paired before:
(1) Turn on the two speakers by sliding the “ON/OFF/BT” to “BT”
respectively (the Interval time should be more than 1 seconds.), and the
two speakers will be automatically connected with an indicating sound .
(3) Set the Bluetooth on your smart phone, click the previous pairing
record “True wireless stereo”, you will hear an indicating tone around 5
seconds and your phone shows the device is connected around
(2) If the connection record was cleaned, please follow instruction A.
Notice:
(1) The one connected with your smart phone is the Master for the left
chennal, the other is the slave for the right chennal. Only the Master
speaker can redial the call(subject to the last number in call history) by
press and hold around 3 seconds
(2) If your smart phone shows the connection unsuccessful, but it can’t
play the music or dial the call. Please turn off the blue-tooth, repeat
above connection steps.
Note 1:
Open its own music player of the smart phone, press , and you can
play music from the speaker, then press , , , which can
control the pause/play, next/previous of your smart phone. But if the
music player is downloaded, which may not support the speaker control
of those functions on the phone.
Note 2:
If the paired record was deleted, please follow up the instruction A.
7