Shintaro Wireless Vibro Speaker, User Manual

Page: 7 / 11

(5). If your smart phone shows the device is connected, but no sound
when you play music or you can’t dial a phone number when you long
press , turn the smart phone Bluetooth off and turn on again, choose
“True wireless stereo” record², reconnecting by hand hearing an
indicating sound and your phone shows the device is connected.
connection succeeded, then play music or dial the call.
B. The speaker has paired with smart phone before
(1) Slide “ON/OFF/BT”switch to “ BT”, you will hear the power-on
indicating sound and three quick beeps.
(2) Open your smart phone and activate Bluetooth, click the paired
record² of "True wireless stereo", the smart phone and the speaker are in
pairing mode.
(3) Please follow 3-5 of Part A
A pair of speakers connection instruction:
A. A pair of speakers pair with smart phone for the first time
Slide “ON/OFF/BT” to “BT”of both speakers, you will hear the power-on
indicating sounds and three quick beeps respectively. Press button
and hold at the same time until you hear three ticks , the speakers will be
in pairing mode for each other. The connection will be done with a
different indicating sound around 20 seconds. Then choose either of the
speakers, press button and hold until you hear two ticks ,then the
speaker is ready for pairing.
(1). Make sure that the Bluetooth is activated on your smart phone, scan
Bluetooth device under the name “True wireless stereo” and pair with it,
and you will hear an indicating sound that means a successful pairing
with your smart phone. The one connected with Smart phone will be the
Master speaker for left channel, and the other is slave speaker for right
channel.
(2). Open the music player, press , and you can play music from the
speaker, then the speaker control the pause/play, next/previous song by
pressing , , .
(3). Long press till you hear a beep , dial the last number in your
phone call history Short press , answer a call when a phone comes in,
6