32
7 Addition Function
The addition function allows you to find the cumulative weight of samples put on the balance one
after another. Except for the gravimeter function, all other functions, i.e., weighing machine, parts
counting, and percentage weighing functions support the addition function.
7.1 Cumulate
Function
With the cumulate function, a cumulative weight can be obtained while samples are reloaded.
1 Set Function1.
Set Function1 from [2. SEL 1] to
[2C. Ad.M 1].
Then, press the Set key to return to the measurement
mode.
2 Reset the display to 0.
Press the Zero/Tare key for zero adjustment or for
tare range.
3 Put samples on the balance, and obtain the
weight.
Put samples to weigh on the balance.
When the asterisk (*) sign is displayed, you can put
additional samples on.
When [ ] is displayed, press the Set key.
The displayed value is added, and the cumulative
value is displayed with the [
Σ
] sign for several
seconds.
4 Put another sample on the balance.
Unload the balance, check that the display indicates 0,
and put different samples on.
5 Read the weight.
When [ ] is displayed, press the Set key.
After it is stabilized, the displayed value is added, and
the cumulative weight is displayed with the [
Σ
] sign
for several seconds.
6 Display the cumulative weight.
Press the Function key twice.
The sign [
Σ
] will be lit and the cumulative value will be
shown.
(The number of times the Function key is pressed
depends on the type of the balance.)
7 Clear the cumulative weight.
Press the Zero/Tare key with the cumulative weight
displayed (step 4) to reset the display to 0.
Obtain a cumulative weight without reloading the balance
Press the Zero/Tare key in step 2 without unloading
the balance. This will reset the display to 0.
Put additional samples on, and press the Set key.
Then, the weight is cumulated.
Caution:
1.
Put additional samples on when the display indicates zero.
2. When [t-Err] is displayed when you press the Set key, it indicates that you put additional samples on
twice, that you unloaded some samples, or that you pressed the key without adding samples.
3. You can add samples when an asterisk (*) is displayed.
