Shinko Denshi LN 12001CE Operation Manual Download Page 11

Page: 11 / 78

3.3 Operation

Check

3.3.1

Turn the power on and off and check the display

Connect the AC adapter.
The balance enters standby mode, and the Stand by
lamp (LED) lights up.

Press the On/Off key.
When the display lights up, check it for missing signs.

When an object is lying on the pan, the blinking “on 0”
is displayed. In such cases, remove all the objects on
the pan.
If a unit other than “

” (gram), “

” (kilogram) or “ct”

(carat) is selected as Unit A, the unit automatically
changes to “

”.

Check changes of the display.

Give the pan a slight press, and check that the
display is changed.

Check that the display goes back to zero when you
lift your hand.

Stand by

Press the On/Off key again.
The balance enters standby mode, and the Stand by
lamp (LED) lights up.

3.3.2

Set a Tare Weight

1 Put tare (container) on the balance.

Put tare on the balance, and the weight is displayed.

2 Reset the display to 0.

Press the Zero/Tare key.

The tare weight is set, and the display is reset to
zero.

3 Put a sample on the balance.

The net weight of the sample in the container is
displayed.

On/Off

Summary of Contents for LN 12001CE















































































Search results

Summary of Contents for LN 12001CE

Reviews:

Related manuals for LN 12001CE

Brands by name

Popular brands

Shinko Denshi LN 12001CE, Operation Manual

Search results

Summary of Contents for LN 12001CE

Reviews:

Related manuals for LN 12001CE

Brands by name

Popular brands