Shinko Denshi CSP-160 II, User Manual

Page: 8 / 18

USER'S MANUALMODEL CSP-160Ⅱ
5
５．
INSTALLATION
5.1 Connections
1.Verify that power switches of the CSP-160II Printer and the scale are both OFF.
2.Connection with the scale. Connect one of the connectors of the attached cable with
S.IN jack of the CSP-160II and the other connector of the cable to output jack of
the scale.
3.Connection of the AC adaptor.
Connect the jack of attached AC adaptor with DC.IN jack of the CSP-160II
．
4.Connection of foot switch option
Connect the foot switch F.SW jack of the CSP-160II.
5. 2 Ink Ribbon Setting
1. Remove the printer cover by lifting it up.
2. To remove old cartridge, press the end of the cartridge at “PUSH” mark.
3.Setting new ribbon to platen, put a new cartridge in, fitting knob axis. Turn
the knob to arrow direction to get rid of the slack in the ribbon.
NOTE
：
The ink ribbon is disposable, don’t put ink to the ribbon.
PUSH
Ribbon
Cartridge
Printer
Ribbon Cartridge
Knob
Ribbon