USER'S MANUALMODEL CSP-160Ⅱ
1
USRES’MANUAL
MODEL CSP-160
Ⅱ
１．
INTRODUCTION
The Operation Micro-Printer CSP-160II, storing data from your Shinko electronic
scale, operates Total, Average, Deviation, Maximum, Minimum, Ratio of Data
of out of Limits, etc., besides ordinary data recording.
The results are printed by cartridge ink ribbon.
1-1. Features
*
Statistical Operation and Printing
Number of Data
(N)
Average
(AVE)
Maximum
(MAX)
Standard Deviation
(
σ
n,
σ
n-1)
Minimum
(MIN)
Failure Ratio
(P)
Range
(R)
Total
(TOTAL)
*
Histogram
*
Judgements:
HIGH, LOW or GOOD of data
*
AUTO/MANUAL selectable
CAUTIONS ON USE
1. Always use the attached AC adaptor only, by connecting to an isolated line outlet
from other devices to avoid disturbing noises.
2. Turn off the power switch of CSP-160II first, before cutting line power off. Never
unplug the AC adaptor from the outlet before turning the printer switch off.
Turn off power switches of both printer and scale before connecting/disconnecting
cable and the AC adaptor.
3. Do not print without setting roll paper and/or ink ribbon.
4. Position and use the printer in a suitable place. A quiet area without vibration,
dusts, humidity, heat or cooling sources, is preferable.
5. After operation, turn off the power switch of the printer, then unplug the AC
adaptor from The line outlet without fail.
Summary of Contents for CSP-160 II
Page 1: ...USER S MANUAL FOR OPERATION PRINTER MODEL CSP 160Ⅱ SHINKO DENSHI CO LTD Tokyo 3325M81 ...
Page 2: ...はくし ...
Page 17: ...はくし ...
Page 18: ...はくし ...
