Shining Stars ZX-V8T, Owner'S Manual

Page: 5 / 60

- 4 -
Only the treadmill had finished the installation and the motor protect cover is put on,
you can connect power line. Plug in the power line into the power socket which is
with the 16A safety grounding, we suggest you to use over current protector to
ensure the safety of the user and the treadmill.
1. PLS place the treadmill on a clear, level ground. Do not place the treadmill on
thick carpet ,as not to effect with ventilation under the treadmill. Also do not use
the treadmill placing it by water or outdoor,notice to avoid moisture.The treadmill
power line is specific, if the power line is damaged, please purchase from the
dealer, or contact to the company directly.
2. When you place the treadmill, do not let the treadmill cover the socket on the wall,
which is convenient to plug in the power line.
3. Never start the treadmill while you are standing on the running belt. After
connecting the power, there maybe a pause after the running belt begins to move,
you should always stand on the treadmill side plastic non-slip rails until the belt is
moving.
4. Do not wear long, loose fitting clothing when you exercise, in case it may get
caught in the treadmill. Usually you need to wear running shoes or sports shoes
with rubber soles.
5. Never remove the protective cover casually, if need to open for maintenance, PLS
make sure to unplug the power line firstly.
6. Keep the kids away from the treadmill during using.
7. When you use the treadmill the first time, hold the handrails until you adapt.
8.
The treadmill is indoor equipment ,do not use outdoor, Should place the
treadmill in the clean and level place, do not place the treadmill at the
moist places, The treadmill is made for special use, Please do not
remodel or refit for other use.
9.Child use the treadmill must have adult on side
If the treadmill suddenly increase in speed or speed up continually, due to an
electronic system
problem, please pull out the safety switch, the treadmill will
immediately stop.